Amplifiers


Category: Amplifiers
Order by:  
Results: 16
Page 1 of 2
1 |
2
Go to page:  

 

The XLI Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

The four models in the series are the XLi800, XLi1500, XLi2500 and XLi3500. They are identical except for output power.

Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!


Specifications

Frequency Response 20 Hz - 20 kHz, +0/-1 dB (at 1 watt)
THD <0.5%, 20 Hz - 20 kHz
Intermodulation Distortion =/ <0.35% (60 Hz and 7 kHz at 4:1 from full rated ouput to -30 dB)
Slew Rate >10V/us
Voltage Gain 29 dB
Damping Factor (8 ohms, 10 Hz to 400 Hz) >200
Signal To Noise Ratio (A-weighted) >100 dB
Crosstalk (below rated power) 20 Hz to 1 kHz -75 dB, -59 dB
Input Sensitivity (for full rated power at 8 ohms) 0.775V or 1.4V
Input Impedance (nominal balanced, unbalanced) 20kΩ, 10kΩ
AC Line Voltage and Frequency Configurations Available (+10%) 120V~60 Hz; 220V~50/60 Hz; 230-240V~50/60 Hz
Dimensions 19" x 3.5" x 12.4" (48.3cm x 8.9cm x 31.5cm)
Weight 25.1lbs (11.4kg)
IEC Power Connector 15A
€ 195.00   
CONTACT WITH THE SELLER
Convection cooled Power Amplifier Ideal for studio or where space is at a limit The Phonic Max is 2 x 120 Watts 4 Ohms 2 x 80 watts 8 Ohms Jack and XLR Inputs and binding posts for speaker outputs Phonic's MAX 500 Power Amplifier provides 120 Watts of power at 4 ohms (stereo) in a single rack space - ideal for medium-size venues and for monitoring purposes. MAX 500 features ground switches, and the option to choose between stereo or parallel operating modes. Input to the MAX 500 amp is achieved via XLR or phone jack, and output is achieved through binding posts, making the MAX series of amplifiers ideal for real world application. Output power: 120W @ 4 ohms stereo, 90W @ 8 ohms stereo Studio quality performance with very low noise and wide dynamic range Class H high efficiency circuitry design Ultra-low total harmonic distortion High damping factor provides exceptional loudspeaker motion control Detented level controls for precise repeatability Signal and CLIP indicators to monitor performance Protect indicator Short circuit, thermal, subsonic, RF protection, output DC offset, over-heat protection and power on/off muting Convection cooling system dissipates heat through the heat sink and chassis for noise-free operation One rack unit Dimentions W482 H44 D340mm Weight 7.85Kg
€ 270.00   
More

 

60W 100V Amplifier with integral 5 channel mixer and audio player in a 2U rack-mountable housing. Generous features and versatility provide a comprehensive control centre for commercial sound installations.

 

  • 5 Channel mixer
  • USB/SD audio player
  • FM tuner
  • Bluetooth connectivity (version 2.0)
  • Controls: Mic1, mic/line2+3, line4+5, bass, treble, master volume
  • Rear panel switches: Phantom, Vox, Mic/Line (2 + 3)
  • Phantom power: +20V (mic 1 input)
  • Inputs: Mic XLR, 2 x mic/line jack, 2 x RCA line
  • Line output: RCA
  • Speaker outputs: 8R or 100V
  • 2U 19" rack mountable (rack ears supplied)
  • Power Supply (AC): 110V 60Hz or 230V 50Hz, switchable (IEC)
  • Power Supply (DC): 24V (screw terminals)
ONLINE OFFER!
€ 300.00    250.00
CONTACT WITH THE SELLER
  • 2x 450 Watt/4 Ohm
  • 2x 330 Watt/8 Ohm
  • 900 Watt/8 Ohm bridge mono
  • Signal to noise ratio > 100 dB
  • Damping factor > 200
  • XLR/RCA input
  • Speaker Twist and binding post outputs
  • Turn-on delay
  • Protection against shorts
  • 19", 2 U
  • Installation depth: 31.5 cm
  • Weight: 12.7 kg
Power (4 Ohms) per Channel 450 W
Channels 2
Rack Units 2 U
Amp Class Class AB
2 Ohm stable No
DSP/Crossover No
Convection cooling No

The XLI Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

The four models in the series are the XLi800, XLi1500, XLi2500 and XLi3500. They are identical except for output power.

Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!

€ 350.00   
More
Output power: 450W @ 4 ohms stereo, 280W @ 8 ohms stereo High-current toroidal transformers for greater power and low noise Balanced 1/4" TRS and XLR inputs for maximum flexibility Grounding / Floating switch to avoid grounding loop Binding post and Speakon-type outputs Front mounted gain controls for easy access Signal and Peak LED indicators to monitor performance Short circuit, thermal, subsonic, RF protection, output DC offset Power on/off muting Phonic's MAx 1500 Plus Power Amplifier provides 900 Watts of power at 8 ohms (bridge mono) or 450 Watts at 4 ohms (stereo) - ideal for clubs, churches, auditoriums and more. Input to the MAX 1500 Plus amp is achieved via XLR or phone jack, and output is achieved either through Speakon-type connectors or traditional binding posts. The MAX 1500 Plus features ground switches, and the option to choose between stereo, parallel and bridge operating modes, making this amplifier ideal for real world application.
€ 380.00   
More

 

120W 100V Amplifier with integral 5 channel mixer and audio player in a 2U rack-mountable housing. Generous features and versatility provide a comprehensive control centre for commercial sound installations.

 

  • 5 Channel mixer
  • USB/SD audio player
  • FM tuner
  • Bluetooth connectivity (version 2.0)
  • Controls: Mic1, mic/line2+3, line4+5, bass, treble, master volume
  • Rear panel switches: Phantom, Vox, Mic/Line (2 + 3)
  • Phantom power: +20V (mic 1 input)
  • Inputs: Mic XLR, 2 x mic/line jack, 2 x RCA line
  • Line output: RCA
  • Speaker outputs: 8R or 100V
  • 2U 19" rack mountable (rack ears supplied)
  • Power Supply (AC): 110V 60Hz or 230V 50Hz, switchable (IEC)
  • Power Supply (DC): 24V (screw terminals)
ONLINE OFFER!
€ 400.00    350.00
CONTACT WITH THE SELLER
Output power: 2 x 150W @ 70V or 100V Barrier strip connection determines output mode: 25V, 70V, 100V and low impedance outputs available simultaneously Automatic dual-speed, high-efficiency cooling fan Rear panel detented gain controls Stereo, bridge, or parallel operating modes XLR and barrier strip inputs XLR inputs and outputs for easy signal pass through in multi-amp setups Full short-circuit, temperature and DC offset protection Toroidal output transformers provide full electrical isolation and meet worldwide safety standards Built-in 45 Hz subsonic filter prevents speaker transformer saturation with minimal effect on program material ICON Series power amplifiers are designed with the needs of sound contractors in mind. The binding post outputs allow for connection to standard low impedance speakers. Barrier strip outputs enable 25V, 70V and 100V Line operation. Each amplifier channel has a separate toroidal secondary transformer that provides full electrical isolation and ensures maximum audio separation. Features like power up muting, full short-circuit, temperature, DC offset protection and a built-in 45 Hz subsonic filter, combine to make the Icon Series an attractive, cost effective solution for any audio installation.
€ 400.00   
More

 

100V amplifiers with integral 5 channel mixer in a 2U rack-mountable housing. Inputs include a balanced XLR for microphone with switchable phantom power and Vox override, 2 mic/line jack inputs and 2 RCA line inputs, of which one can be fed from the internal USB/SD player with built-in FM tuner and Bluetooth receiver. Bass & Treble EQ and Master volume control the overall output, which can power either 8 Ohms or 100V line speakers. Generous features and versatility provide a comprehensive control centre for commercial sound installations.

 

Features


  • 5 channel mixer
  • Integral USB/SD audio player
  • Integral FM tuner
  • Bluetooth connectivity
  • External D.C. power option
  • 8 Ohms or 100V line speaker output
  • 2U 19" rack mountable (rack ears supplied)

 

Specifications

 

  • Power supply 110/240Vac, 50/60Hz (IEC)
  • DC power 24Vdc (screw terminals)
  • Inputs    Mic XLR, 2 x mic/line jack, 2 x RCA line
  • Input sensitivity : mic 1 (balanced) -53dBV
  • Input impedance : mic 1    5k Ohms
  • Input sensitivity : line (unbalanced) -15dBV (-18.5dBV line 5)
  • Input impedance : inputs 2-5 1k Ohms
  • Line output RCA
  • Controls Mic1, mic/line2+3, line4+5, bass, treble, master volume
  • Equalizer : bass 100Hz ±10dB
  • Equalizer : treble 10kHz ±10dB
  • Rear panel switches Phantom, Vox, Mic/Line (2 + 3)
  • Phantom power +20V (mic 1 input)
  • Audio source USB/SD player, FM tuner and Bluetooth receiver
  • Bluetooth version 2.0
  • THD
  • Dimensions 433 x 320 x 89mm
€ 450.00   
CONTACT WITH THE SELLER
•Compact size up to 1500 watts in 2 rack spaces •Output power: MAX2500(750W@4) •Professional quality performance •High-current toroidal transformers for greater power and low noise •Independent user-defeatable peak limiters reduce distortion •Selectable High-Pass filter at 30Hz or 50Hz •XLR and 1/4 TRS input jacks •Binding post and speakon outputs •Front mounted gain controls for easy access •Signal and Peak LED indicators to monitor performance •Short circuit, thermal, subsonic, RF protection, output DC offset, power on/off muting
ONLINE OFFER!
€ 450.00    385.00
More
  • An affordable and reliable power amplifier you can use in any PA system
  • 1,500-watts in bridged-mono mode, up to 750-watts stereo/parallel operation
  • Includes both unbalanced RCA and balanced XLR input connectivity
  • Binding post and speakON output connectors let you use virtually any passive PA speakers
  • Selectable input voltage (.755V or 1.4V) lets you set up your rig to match your gear
  • LED power, fault, signal-presence, and clip indicators let you keep an eye on the safety of your amplifier
  • Forced-air cooling and protection against shorts, no-load, and on/off thumps ensure smooth operation and long life
  • Excellent shielding against radio-frequency interference keeps your sound clean, even in heavy wireless condition
    • 2 x 750 W / 4 Ohm
    • 2 x 500 W / 8 Ohm
    • 1500 W / 8 Ohm Bridge Mono
    • Signal To Noise Ratio > 100 dB
    • Damping Factor > 200
    • XLR/RCA input
    • Speaker Twist and binding post outputs
    • Turn-on delay
    • Protection against shorts
    • 19", 2 U
    • Installation depth: 31.5 cm
    • Weight: 13.5 kg


€ 550.00   
More
Phonic XP Series power amplifiers deliver from 280 to 5000 Watts of power in two to three rack spaces. Built around robust and advanced toroidal transformers, they deliver clean power on demand. The advanced protection circuitry guards against short circuit and open circuit, and also protects against ultrasonic and RF interference. A dual mono, high current power supply increases reliability and performance. Other features include center-detented gain controls, input peak limiter, selectable high pass filter, and fast recovery to ensure low distortion. The variable speed fans effectively cool the amp with rear to front air flow and protect against overheating. Input is through XLR or 1/4" connectors, while you can use Speakon®-type or traditional binding post connectors for output. The XP 2100, 3100 and 5100 power amps have sub woofer outputs with a selectable low-pass filter, selectable at of 60, 90 or 120 Hz. Phonic XP Power Amplifiers are specially designed for professionals who value high power, audio clarity, reliability and lasting performance. * Output power: 600W @ 4 Ohm, 960W @ 2 Ohm * High continuous current output from robust toroidal transformer * Switchable input peak limiter and selectable high pass filter (30 Hz, 50 Hz) to reduce distortion and protect speakers * Front mounted detented gain controls for easy access * Bridge mono and parallel mode LEDs * Fast Recovery design for lower distortion if clipping occurs * Very rugged housing * Active balanced inputs for low noise * Signal level at -40, -20, -10, protect and clip LED indicators to monitor performance * Ground Lift switch to prevent humming * Selectable stereo, parallel and bridge mono amp modes * Two ventilation variable speed fans * Speakon®-type connectors and 5-way binding posts speaker outputs * XLR and 1/4" TRS connectors for maximum input flexibility * Requires three standard rack units for mounting * Fits a standard 19" rack
€ 550.00   
More

2800 Watt Power Amplifier

  • Advanced powerful performance 3rd generation circuitry design
  • Output power per channel: 1100W @ 4 ohms, 1400W @ 2 ohms
  • Front mounted two low pass filters and two gain controls
  • High continuous current output from robust toroidal transformer
  • Switchable input peak limiter and selectable high pass filter (30Hz, 50Hz) to reduce distortion and protect speakers
  • Bridge mono and parallel mode LEDs
  • Fast Recovery design for lower distortion if clipping occurs
  • Very rugged housing
  • Active balanced inputs for low noise
  • Signal level at -40, -20, -10, protect and clip LED indicators to monitor performance
  • Ground Lift switch to prevent humming
  • Selectable stereo, parallel & bridge mono amp modes
  • Two ventilation variable speed fans
  • Speakon-type connectors and 5-way binding posts speaker outputs
  • XLR & 1/4" TRS connectors for maximum input flexibility
  • Requires three standard rack units for mounting
  • Fits a standard 19" rack
€ 750.00   
More

Page 1 of 2
1 |
2
Go to page: